1 / 7
Overview
- Make
- GMC
- Model
- GML-2080
- Type
- Gap Bed Lathes
- Condition
- New
- Stock #
- GML-2080
Spec Sheet
- ISO 9001 certified
- Large spindle bore 3-1/8”
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 12”
- Heavy Duty main motor 10HP
- 16 spindle speeds from 25-1,800 rpm, 12 speeds
- 4-way rapid traverse on the carriage longitudinal and cross
- 60 kinds of inch threads, and 41 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- One year industrial warranty for parts
DISCLAIMER
Please note this machine is incompatible with the use of a rotary phase converter. Any attempt to purchase, install, or employ one, whether carried out by you or a professional service company, will automatically void the warranty. It is crucial to understand that any such actions are entirely the responsibility of the buyer.
This disclaimer is intended to clearly convey that the utilization of a rotary phase converter to power or operate this machine is not supported.
| Max. swing over bed | 20" |
| Max. length of workpiece | 80" |
| Max. swing over cross slide | 12 1/2" |
| Max. Swing in gap | 29-1/8" |
| Width of Bed | 12" |
| Effective length in gap to spindle | 6" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 3 1/8" | D1-8 |
| Taper of spindle center | M.T. #7w/ reducing sleeve MT7/MT5 |
| Spindle speeds | 25-1,800 rpm / 12 steps |
| Longitudinal feeds | 0.0011-0.063 IPR, 42 kinds |
| Cross feeds | 0.0003-0.018 IPR, 42 kinds |
| Inch threads | 2-112 TPI, 60 kinds |
| Metric threads | 0.1-14 mm , 41 kinds |
| Diametral Pitch threads | 4-112DP , 50 kinds |
| Module threads | 0.1-7mm, 34 kinds |
| Max. travel of top slide | 5" |
| Max. travel of cross slide | 11 1/4" |
|
Spindle length w/o chuck Leadscrew length X TPI |
17-1/2" 1 1/4" x 4 TPI |
| Diameter of tailstock quill | 2-3/8” |
|
Max. travel of tailstock quill |
5-1/8” |
| Taper of tailstock quill center | MT4 |
|
Main motor |
10 HP 3 Ph. Prewired: 220VAC / 35A Optional: 440VAC / 20A |
| Coolant pump |
1/8 HP 3 Ph. Prewired: 220VAC Optional: 440VAC |
| Net weight | 6,350 lbs. |
| Overall dimensions, LxWxH | 128" x 43" x 59" |
For more complete information: https://www.gmcmachinetools.com/catalog
Similar Equipment
#GML-1440HD
#GML-1640HD
GMC
GML-1640HD, 16 x 40" Heavy Duty Precision Gap Bed Lathe w/ DRO
- Lathes, Gap Bed
- GML-1640HD
#GML-2060
